How to Extend the Life of Bore Water Pumps in Australia

Bore water pumps are essential for farms, mines, and rural properties across Australia. With the right maintenance and water management, a quality bore pump can last 20 years or more. Here’s how to keep yours running efficiently and avoid costly breakdowns.

1. Regular Maintenance

Inspect seals, bearings, and impellers regularly. Clean the pump to prevent clogging and lubricate moving parts as recommended. If you have iron bacteria or mineral fouling, schedule an annual BoreSaver Ultra C treatment to maintain performance.

2. Correct Installation

Follow manufacturer installation guidelines and use the correct pipe sizes to avoid pressure and flow issues that cause early pump wear.

3. Monitor Water Quality

Install filters or sand traps to protect against silt and abrasive particles. Test pH, salinity, and total dissolved solids (TDS) regularly to detect scaling or corrosion problems early.

4. Prevent Dry Running

Running a pump without water can cause serious damage. Fit a dry-run protection device to automatically shut off the pump when water levels drop.

5. Electrical and Seasonal Protection

Keep electrical connections sealed, use surge protection, and inspect your system before and after each irrigation season.

By combining routine maintenance, water quality checks, and preventive protection, you can extend your bore pump’s life, improve efficiency, and reduce long-term operating costs.

Aquabiotics Industrial Pty Ltd — Specialists in bore cleaning and rehabilitation.📞 +61 8 9379 2911 🌐 www.boresaver.com.au