top of page

Bore & well cleaning methods

Choosing the right chemical treatment solution is straight forward, choosing the right treatment methodology can be a lot more difficult.

The most challenging aspect of many work sites are the practical constraints and often its of a budgetary nature. This can be where leaving the pump in the bore/well and cycling the treatment solution is the best they are prepared to pay for. Yes, pulling the pump and doing it properly I always best but sometimes its not an option. Something we encountered in Milano Italy were closing the street and getting a rig in made the job very expensive and difficult.

Here is an example of a recirculation setup that just focuses the BoreSaver Ultra C cleaning solution on the pump and rising main. Cycling the treatment solution does a good enough job for most situations and keeps the cost contained. The head works modifications are minor and of course only need to be done once.

20 views0 comments

Recent Posts

See All

What is Sonic Drilling

Looking to delve into the fascinating world of drilling technology? Then you've come to the right place. In this article, we'll explore the ins and outs of sonic drilling, an innovative technique revo


bottom of page